Philips Respironics System One REMstar BiPAP AutoSV DS960HS
Click To Enlarge

 

Philips Respironics System One REMstar BiPAP AutoSV DS960HS

 

   

The BiPAP autoSV Advanced System One device is intended to augment your breathing by supplying pressurized air through a circuit. It senses the your breathing effort by monitoring airflow in the circuit and adjusts its output to assist in inhalation and exhalation. This therapy is known as Bi-level ventilation. Bi-level ventilation provides a higher pressure, known as IPAP (Inspiratory Positive Airway Pressure), when you inhale, and a lower pressure, known as EPAP (Expiratory Positive Airway Pressure), when you exhale. The higher pressure makes it easier for you to inhale, and the lower pressure makes it easier for you to exhale.

When prescribed, the device can also provide features to help make your therapy more comfortable. The ramp function allows you to lower the pressure when trying to fall asleep. The air pressure will gradually increase until the prescription pressure is reached. Additionally, the Bi-Flex comfort feature provides increased pressure relief during the expiratory phase of breathing.

Available Therapy Features

If prescribed for you, the device provides the following therapy features.

Bi-Flex Comfort Feature

If enabled, the device provides a comfort feature called Bi-Flex. The Bi-Flex attribute adjusts therapy by inserting a small amount of pressure relief during the latter stages of inspiration and during active exhalation (the beginning part of exhalation). Bi-Flex levels of 1, 2, or 3 progressively reflect increased pressure relief that will take place at the end of inspiration and at the beginning of expiration.

Ramp

If enabled, the device is equipped with a linear ramp function. The Ramp feature will reduce the pressure and then gradually increase (ramp) the pressure to the prescription pressure setting so patients can fall asleep more comfortably.

Rise Time Comfort Feature

If enabled, the device provides a comfort feature called Rise Time. Rise time is the amount of time it takes the device to change from the expiratory pressure setting to the inspiratory pressure setting. Rise time levels of 0, 1, 2, or 3 progressively reflect slowed response of the pressure increase that will take place at the beginning of inspiration. A setting of 0 is the fastest rise time while a setting of 3 is the slowest. Providers should adjust the rise time to find the most comfortable setting for the patient. Rise time cannot be adjusted when Bi-Flex is enabled.

Specifications/Part Numbers and Accessories

Foam filter kit 1063091

Ultra-fine filter kit 1063096

System One heated humidifier 1056209

Accessories

System One Performance Tube 15 (15 mm) 1074400

Water chamber 1063785

Power supply 1063786

Carrying case 1063857

Power cord 1005894

Specifications

Pressure range: EPAP 4 to 25 cm H2O IPAP 4 to 25 cm H2O

Flex pressure relief: Bi-Flex

Ramp time: 0 to 45 min. (5-min. increments)

Starting ramp pressure: 4 to EPAP; patient-adjustable

Dimensions: 7" L x 5.5" W x 4" H (without humidifier) 18 cm L x 14 cm W x 10 cm H (without humidifier)

Weight: 3.37 lbs; 1.53 kg (without humidifier)

Filters: Foam and optional ultra-fine

Device set-up: LCD/control wheel/push button

Data storage capacity (minimum): Display: Compliance VIC 7- and 30-day averages SD Card: >1 year On-board: up to 6 months

Compliance meter: Breathing detection

Altitude compensation: Automatic

Electrical requirements: 100 – 240 VAC, 50/60 Hz

Humidification: Integrates with System One heated humidifier

Warranty: Two years; replace with new

Miscellaneous: Lighted LEDs

Item Number: DS960HS

Prescriptions

Federal law requires we have a valid prescription on file before we ship your order. Please submit a prescription with an expiration date, written for "lifetime need", or "99 months". As long as the prescription has these requirements, you can purchase this equipment. 

Even if you are making the purchase of a prescription-required item without insurance, we will need a prescription to fulfill the order based on Federal regulations.

CPAP Accessories and mask assembly kits can be sold without a prescription.

 

  • Item #: DS960HS
  • Manufacturer: Respironics
  • Manufacturer's Product Number: DS960HS
  • Condition: New

Philips Respironics System One REMstar BiPAP AutoSV DS960HS

Price: $3,499.00
Sale Price: $2,995.95
* Marked fields are required.
Availability: In-Stock
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review